User Manual Q&AAnswer
Feb 07, 2025 - 11:21 PM
To connect the NEO Stream to your audio system, follow these steps:
1. Power on the NEO Stream using the power switch located on the rear panel.
2. Connect your audio system to the NEO Stream using one of the available output options:
- For balanced output, use the 4.4mm Analogue Line Output.
- For single-ended output, use the RCA Line Output.
- For digital output, use the S/PDIF Optical or Coaxial Output, or the AES/EBU (XLR) Signal Outputs.
3. If you have a USB DAC, you can connect it to the NEO Stream using the USB-C Input/Output or the USB Type A ports.
4. For network connectivity, you can use either the Wi-Fi or Ethernet inputs. Connect an Ethernet cable to the M12 Ethernet Input or RJ45 Ethernet Input, or connect to a Wi-Fi network.
5. Once connected, you can control the NEO Stream using the OLED display and multi-function xxxx on the front panel.
For more detailed instructions and illustrations, please refer to the NEO Stream User Manual.
Add New Comment