How do I install the VOLA S1009 Water Supply Valve Deck-Mounted Basin Sets and Toilets in Dark Grey? (vola S1009 Water Supply Basin Sets Dark Grey Instruction Manual)

Answer

manuals.plus

Feb 07, 2025 - 11:15 PM


Installation of the  can be done by following the provided fitting instructions. Here is a step-by-step guide:

1. Start by ensuring that the water supply to the basin or toilet is turned off.

2. Position the basin or toilet in the desired location on the deck or countertop.

3. Connect the water supply hoses to the water supply valve on the underside of the basin or toilet. Ensure that the hoses are securely tightened.

4. Attach the other end of the water supply hoses to the water supply pipes in the wall or floor. Again, make sure they are securely tightened.

5. If necessary, connect the drain pipe to the basin or toilet. Follow the manufacturer's instructions for proper installation.

6. Once all connections are made, turn on the water supply and check for any leaks. If any leaks are detected, tighten the connections further or replace any faulty parts.

7. Test the functionality of the basin or toilet by turning on the water and flushing the toilet (if applicable). Ensure that the water flows correctly and that there are no issues with flushing or draining.

Please note that these instructions are a general guide and may vary depending on the specific model and design of the VOLA S1009 Water Supply Valve Deck-Mounted Basin Sets and Toilets in Dark Grey. It is always recommended to refer to the fitting instructions provided with the product for the most accurate and detailed installation process.