User Manual Q&AAnswer
Feb 07, 2025 - 11:01 PM
To assemble the KARCHER HD 2.8 Pressure Washer, follow these steps:
1. Attach the high-pressure hose to the spray gun using Teflon tape on the hose threads. Use the safety latch to prevent it from opening.
2. Connect the garden hose to the cold water source. Before installing the nozzle, turn on the water supply and run the machine to flush water through the system until it runs clear.
3. Insert the nozzle into the coupler. Release the coupler collar and push the nozzle until it clicks. Pull the nozzle to ensure it is properly seated.
4. Connect the high-pressure hose to the outlet discharge fitting. Push the coupler collar forward until it is secure. Connect the garden hose to the pump water inlet. Inspect the inlets.
Please refer to the "Assembly Instructions" section in the user manual for more detailed instructions and illustrations.
Note: It is important to read the entire user manual and follow all safety guidelines before using the pressure washer.
Add New Comment