User Manual Q&AAnswer
Feb 07, 2025 - 10:48 PM
To install the Oricom TPS9I TPMS Tyre Pressure Monitoring System, follow these steps:
1. Determine the installation position: Choose a suitable location in your vehicle to mount the display unit. It should be easily visible to the driver.
2. Place the anti-slip mat: Before mounting the display unit, place the provided anti-slip mat underneath it to ensure it stays in place.
3. Connect the USB charging cable: Connect the USB charging cable to the display unit for power.
4. Install the TPMS sensors: Install the TPMS sensors on each tire. Please note that the metal gasket, nut, and valve cap should be installed outside of the wheel hub.
5. Sensor programming: The TPMS sensors are pre-programmed, but if you rotate your tires or install new ones, you'll need to reprogram the sensors. Refer to the user guide for detailed instructions on how to do this.
6. Functional test: After installation, perform a functional test to ensure the system is working properly. The display should show real-time tire data automatically when the vehicle's speed is over 25km/h.
Please refer to the Oricom TPS9I TPMS Tyre Pressure Monitoring System User Guide for more detailed instructions and illustrations.
Add New Comment