User Manual Q&AAnswer
Feb 07, 2025 - 10:34 PM
To clean the water filter in the Whirlpool FWEB9002 washing machine, follow these steps:
1. Switch off and unplug the washing machine.
2. Close the water tap and unscrew the inlet hose.
3. Clean the mesh filter at the end of the hose carefully with a fine brush.
4. Unscrew the inlet hose on the back of the washing machine by hand.
5. Use pliers to pull out the mesh filter from the valve on the back of the washing machine and clean it under running water.
6. Reinsert the cleaned mesh filter into the valve.
7. Connect the inlet hose to the water tap and washing machine again. Do not use a tool to connect the inlet hose.
8. Open the water tap and check that all connections are tight.
Regularly cleaning the water filter will prevent it from blocking and ensure proper water drainage during the wash cycle.
Add New Comment