User Manual Q&AAnswer
Feb 07, 2025 - 10:15 PM
To remove the GREE Electric Heat Kit Line Voltage, please follow these step-by-step instructions:
1. Ensure that the power to the air handler is turned off at the circuit breaker.
2. Locate the terminal block on the air handler where the line voltage is connected.
3. Identify the L1 and L2 terminals on the terminal block.
4. Disconnect the line voltage permanently from L1 and L2 on the terminal block. This can be done by removing the wires connected to these terminals.
5. Once the line voltage is disconnected from the terminal block, you can proceed with removing the electric heat kit if necessary.
It is important to note that removing the line voltage should only be done by a qualified electrician or HVAC technician to ensure safety and proper disconnection. If you are unsure or uncomfortable with performing this task, it is recommended to contact a professional for assistance.
For further reference and detailed instructions, please consult the installation manual for the FLEXX Electric Heat Kit provided by GREE.
Add New Comment