User Manual Q&AAnswer
Feb 07, 2025 - 10:03 PM
To download and install the EOS Webcam Utility Pro software, please follow these steps:
1. Open your web browser and go to the EOS Webcam Utility Pro website.
2. Select your camera model from the list displayed and you will be redirected to the download page.
3. On the download page, locate and download the "EOS Webcam Utility Pro" software under the software section.
4. Once the download is complete, go to your computer's "Downloads" folder and find the "EOSWebcamUtilityPro-WIN2.X.zip" file.
5. Double-click the .zip file to open and extract its contents.
6. Open the extracted folder labeled "EOSWebcamUtilityPro-WIN2.X".
7. Read the Readme.txt file for any additional instructions.
8. Double-click the "Setup.exe" file in the folder and run the installer.
9. Follow the instructions provided by the installer to complete the software installation.
10. After the installation is complete, save any documents you may be working on, close all applications, and restart your computer.
11. Once your computer has restarted, connect one end of the USB cable to your camera and the other end to your computer. It is recommended to have a direct connection to the computer.
12. Set your camera to "Movie Mode" using the Mode Dial, Mode Switch, or Mode Button interface.
13. Open your preferred web conferencing or streaming app and go to the "Audio/Video settings" menu.
14. Select "EOS Webcam Utility Pro" as the camera of choice and ensure that your computer's built-in microphone is selected as the "microphone".
15. The video input from your camera should now be available for use in your web conferencing or streaming app.
Please note that these instructions are based on the information provided in the EOS Webcam Utility Pro User Guide.
Add New Comment