User Manual Q&AAnswer
Feb 07, 2025 - 09:58 PM
To change the channel on the Unimo Technology UDR Series Supreme Basic DMR radio, you can use either the Channel Select Switch or the Up/Down buttons on the front side of the radio.
- Using the Channel Select Switch: Turn the xxxx of the Channel Select Switch clockwise to increase the channel number. Turn the xxxx counterclockwise to decrease the channel number. The channel numbers can be preprogrammed using the PC program, and the channel selections can also be changed by the Up/Down buttons.
- Using the Up/Down buttons: Press and hold the Up button to increase the channel number. Press and hold the Down button to decrease the channel number. The channel will continue to go up or down continuously while the buttons are held.
Remember, the channel numbers and selections need to be preprogrammed using the PC program for the desired channels to be available for selection.
Add New Comment