User Manual Q&AAnswer
Feb 07, 2025 - 09:56 PM
The installation process for the MITSUBISHI ELECTRIC PKFY-WL10VLM-E.TH Multi Hybrid VRF Hybrid Wall Mount unit is outlined in the user manual. Here is a step-by-step guide to help you with the installation:
1. Select a suitable location: Choose a location on the wall where the unit can be installed securely and where it will not obstruct any objects or furniture. Ensure that there is enough space for proper airflow around the unit.
2. Mount the bracket: Use the provided template to mark the position of the bracket on the wall. Drill holes and secure the bracket using appropriate screws and anchors. Make sure the bracket is level and securely attached to the wall.
3. Connect the refrigerant piping: Connect the refrigerant piping to the unit following the instructions provided in the manual. Use appropriate tools and techniques to ensure a proper and leak-free connection.
4. Electrical connections: Connect the power supply to the unit according to the electrical requirements mentioned in the manual. Ensure that the power supply is properly grounded and that all electrical connections are secure.
5. Test the unit: Once the installation is complete, turn on the power supply and test the unit to ensure it is functioning correctly. Follow the instructions in the manual to set the desired temperature and mode of operation.
It is important to note that the above steps are a general guideline, and it is recommended to refer to the specific instructions provided in the user manual for your model (PKFY-WL10VLM-E.TH, PKFY-WL15VLM-E.TH, PKFY-WL20VLM-E.TH, PKFY-WL25VLM-E.TH, PKFY-WL32VLM-E.TH, PKFY-WL40VLM-E.TH) for detailed installation instructions.
Add New Comment