User Manual Q&AAnswer
Feb 07, 2025 - 09:55 PM
Installation and setup of the IKEA FYRTUR 34 Smart Roller Blind can be done by following these steps:
1. Start by unpacking the blind and all the components included in the package. Make sure you have all the necessary parts before proceeding.
2. Mount the blind brackets on the wall or window frame using screws and a drill. Ensure that the brackets are securely attached and level.
3. Attach the blind to the brackets by sliding it into place. Make sure it is properly aligned and secure.
4. Connect the power supply to the blind. The power supply should be plugged into a standard electrical outlet.
5. Pair the blind with the remote control. Press and hold the pairing button on the blind until the LED light starts blinking. Then, press and hold the pairing button on the remote control until the LED light on the blind stops blinking. This indicates that the pairing process is complete.
6. Test the blind by using the remote control to raise and lower it. Ensure that it operates smoothly and without any issues.
7. If desired, you can also connect the blind to a smart home system or voice assistant for additional control options. Refer to the user manual for instructions on how to do this.
It is important to read and follow all the safety instructions provided in the manual. Regularly inspect the blind for any signs of wear or damage, and do not attempt to repair the product yourself. If you encounter any difficulties during installation or setup, it is recommended to consult the user manual or contact IKEA customer support for assistance.
Add New Comment