User Manual Q&AAnswer
Feb 07, 2025 - 09:40 PM
To install a battery in the POWER ACCESSORIES PB003 Motor Battery Power Center Car Motor Battery Box, please follow these steps:
1. Remove the lid of the Battery Box.
2. Place the battery in the battery box.
3. Attach the clamps from the battery box lid to the corresponding positive and negative terminals on the battery. Fasten the bolts firmly, ensuring they will not become loose. Make sure you connect the correct cable with the battery, do not reverse! The red cable connects to the POSITIVE (+) post, and the black cable connects to the NEGATIVE (-) post. Reversing the cables may damage the inverter fuse and void the warranty. Please note that it may cause a spark when connecting the cable.
4. Place the lid onto the battery box, making sure that it is evenly and completely shut.
5. With the lid on and the terminals connected, switch the battery to ON using the ON/OFF switch and test the voltage with the voltmeter.
6. If the voltmeter lights up and displays the battery's voltage, you can now secure the lid.
7. Turn on the LED light switch and check to see if the LED light is on or not.
8. To secure the lid, thread the strap around the box and through the two plastic buckles. Fasten and secure on top of the unit.
9. You are now free to plug in your devices to power them with your battery.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment