User Manual Q&AAnswer
Feb 07, 2025 - 09:35 PM
To assemble the CRIVIT IAN 388686_2107 Inflatable Pool Goal and Hoop Set, please follow the following steps:
1. Start by inflating the lower air chamber of the water polo goal.
- Open the valve seal (1a) and squeeze the valve stem (1b) together to inflate the air chamber until it feels firm to the touch.
- Close the valve seal and push in the valve by pressing lightly.
2. Inflate the upper air chamber of the water polo goal using the same method as above.
3. Inflate the air chamber of the basketball hoop using the same method as above.
4. Once the air chambers are inflated, proceed to attach the net to the water polo goal.
- Untie the knots on the net and pull it out of the product hole by hole.
5. The assembly of the CRIVIT IAN 388686_2107 Inflatable Pool Goal and Hoop Set is now complete.
Please note that adult assembly is required, and it is important to fully inflate the air chambers to prevent damage to the product and injuries to people. Always follow the instructions for use and safety guidelines provided in the manual.
Add New Comment