User Manual Q&AAnswer
Feb 07, 2025 - 09:28 PM
To properly attach the disc bedder to your tractor, follow these steps:
1. Before mounting the disc bedder, ensure that all nuts and bolts are properly secured.
2. Place the disc bedder on a flat piece of land, making sure it is level.
3. Reverse the tractor towards the disc bedder, avoiding dragging the disc bedder up the tractor.
4. Attach the left arm of the tractor to the disc bedder first.
5. Attach the central arm to the disc bedder by turning the screws on both sides to an equal length. Adjust the arm length if necessary.
6. Attach the lower right arm. Adjust the distance between the hole and mounting pin as needed. Insert the pin into the hole and lock it with the lynch pin.
7. After attaching the disc bedder, lift it and adjust the control arm parallel to the ground. Ensure that all discs are touching the ground uniformly when viewed from the rear or sideways.
For more detailed instructions and illustrations, please refer to the "Operating Instructions" section of the BRABEREQ BE-DB2N Disc Bedder User Manual.
Add New Comment