User Manual Q&AAnswer
Feb 07, 2025 - 09:10 PM
Installation:
1. Ensure that power is not applied to the device during installation.
2. Connect the USB-A male to USB-B male data cable to the controller and the computer.
3. If using the built-in DALI power supply, dial both DALI power setting dip switches to the "ON" position. If using an external DALI power supply, dial both switches to the "1 2" position.
4. Follow the wiring diagram provided in the user guide to connect the DALI system.
Software Installation:
1. Run the "DALI Master" software installation file on the computer.
2. Select the installation mode, language, and path as prompted by the installation wizard.
3. Create a desktop shortcut and complete the installation.
Notes:
- It is important to follow the installation steps correctly to ensure the software starts correctly.
- By default, the software is installed on disk C. If the installation path is not modified, run the software as an administrator by right-clicking the desktop icon, selecting "Properties," switching to the "Compatibility" tab, and checking the item "Run this program as an administrator."
CH340 Driver Installation:
1. Connect the USB communication port wire.
2. Double-click the file "CH341SER.EXE" to install the CH340 driver.
3. If the installation fails, uninstall the previous installation and try again.
4. To check if the installation is successful, right-click "This PC," click "Management," then "Device Manager."
Configuration:
1. Follow the instructions provided in the PC configuration software to configure the master controller and control gears.
2. For detailed operation, refer to the user manual of the PC software.
For further information and detailed instructions, please refer to the SUNRICHER DIN Rail DALI Master Controller User Guide.
Add New Comment