User Manual Q&AAnswer
Feb 07, 2025 - 08:46 PM
To charge the cordless screwdriver, follow these steps:
1. Check if the power voltage on the rating plate corresponds to the voltage available.
2. Plug the charger's power lead into the charging port of the battery, located in the handle of the screwdriver.
3. A red LED on the battery status display will light up, indicating that the battery is charging.
4. As the battery charges, the battery status display will illuminate the red, then the yellow, and finally the green LED once the battery is fully charged.
5. During charging, it is normal for the battery to warm slightly.
6. If the red LED does not illuminate indicating that the battery is charging, verify the following:
- Check if the socket has voltage.
- Ensure that the charger contacts are reliable.
- Verify that there is no damage to the charging cord.
It is important to note that the charging time for the battery is approximately 3-5 hours.
Add New Comment