Answer

Feb 07, 2025 - 08:27 PM
To connect the cables to the POGO blindmate connectors in the multiLane AT93000 Diagnostic Kit, follow these steps:
1. Ensure that the POGO blindmate connectors are attached to the diagnostic stiffener using two socket head M4 x 6 mm screws.
2. Take the cables with the Male and Female 1.85mm mating connectors.
3. Insert the SMPM connections on the cables into the POGO holes.
4. On the opposite side of the POGO, hand tighten the nuts that are attached to the cables.
5. Be careful not to over tighten the nuts.
Please refer to the user manual for visual illustrations and additional information on connecting the cables to the POGO blindmate connectors.
Add New Comment