User Manual Q&AAnswer
Feb 07, 2025 - 08:19 PM
After each day of spraying, it is important to clean all parts of the aircraft. Follow these steps to clean the drone:
1. Fill the spray tank with clean water or soapy water and spray the water through the nozzles until the tank is empty. Repeat this step two more times.
2. Detach the spray tank and spray tank connector (for T10 only) to clean them. Remove the spray tank strainer, nozzle strainers, and nozzles to clean them and clear any blockage. Immerse them in clean water for 12 hours.
3. Clean the aircraft body by using a spray washer filled with water. Wipe the body with a soft brush or wet cloth before removing water residue with a dry cloth.
4. If there is dust or pesticide liquid on the motors, propellers, or heat sinks, wipe them with a wet cloth before cleaning the remaining water residue with a dry cloth.
5. Store the cleaned aircraft in a dry environment.
Make sure to follow these cleaning steps to maintain the performance and longevity of your DJI Agras T30 drone. For more detailed information, refer to the user manual provided by DJI.
Add New Comment