User Manual Q&AAnswer
Feb 07, 2025 - 05:52 AM
To adjust the heat settings on the , follow these steps:
1. Plug in the control unit and switch it on at the socket.
2. Press the power button on the control unit to turn on the throw.
3. Press the temperature setting button to cycle through the 9 heat levels. The default setting is 1.
4. Each press of the temperature setting button increases the heat level by one unit, from 1 to 9. Once you reach 9, pressing the button again will bring it back to 1.
5. If the throw gets too warm for you, you can adjust the heat setting back to level 2 or 1 by pressing the temperature setting button.
6. It is recommended to use level 1 for continuous operation and levels 2 and 3 for heating up only.
7. Before falling asleep, change the temperature setting to level 1.
8. To switch off the heated throw, press the power button. The indicator panel should show nothing when it is switched off. Remember to switch off and unplug the throw at the socket.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment