User Manual Q&AAnswer
Feb 07, 2025 - 05:42 AM
To pair the JENSEN HPTWS10A Wireless Earbuds with your device, please follow these steps:
1. Make sure the earbuds are charged. Place them in the charging case and connect the case to a power source using the provided USB C charging cable.
2. Once the earbuds are fully charged, remove them from the charging case.
3. On your device, go to the Bluetooth settings and turn on Bluetooth.
4. On the earbuds, press and hold the touch control area on both earbuds simultaneously for about 5 seconds until the LED indicator on both earbuds starts flashing blue and red alternately.
5. On your device, you should see "JENSEN HPTWS10A" or a similar name in the list of available Bluetooth devices. Tap on it to connect.
6. The LED indicator on the earbuds will turn solid blue once the pairing is successful.
Note: If the earbuds do not enter pairing mode or if you encounter any issues during the pairing process, please refer to the user manual for troubleshooting steps or contact JENSEN customer support for further assistance.
Reference: Please refer to the JENSEN HPTWS10A Wireless Earbuds user manual for more detailed instructions and troubleshooting information.
Add New Comment