User Manual Q&AAnswer
Feb 07, 2025 - 05:16 AM
To install and use the NINGBO S-GB2PR-08 Wireless Wall Switch, follow these steps:
1. Slide off the back cover of the wall switch.
2. Insert two AA batteries into the battery compartment, ensuring they are inserted in the correct direction.
3. Slide the back cover back onto the wall switch, making sure it locks into place.
4. To turn on the light, press the "ON" button on the wall switch.
5. To turn off the light, press the "OFF" button on the wall switch.
6. If you want to adjust the brightness of the light, use the dimmer button on the wall switch.
7. The device operates wirelessly, so there is no need for any additional wiring.
Please note that this device complies with part 15 of the FCC Rules and must accept any interference received. If you experience any interference with radio or television reception, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment to a different circuit. If the interference persists, consult the dealer or an experienced radio/TV technician for assistance.
It is important to mention that any changes or modifications made to the device without the approval of NINGBO VISION LIGHTING TECHNOLOGY CO., LTD may void the FCC authorization to operate the device. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications.
The NINGBO S-GB2PR-08 Wireless Wall Switch complies with FCC RF radiation exposure limits and can be installed and operated without any restrictions in an uncontrolled environment.
Add New Comment