User Manual Q&AAnswer
Feb 07, 2025 - 05:05 AM
To connect the RDL TX-J2 unbalanced input transformer to your audio equipment, follow these steps:
1. Identify the two unbalanced audio sources that you want to mix or combine.
2. Locate the two gold-plated phono jacks on the front panel of the TX-J2. These jacks are intended for mono or stereo consumer-level sources.
3. Connect the output of the first audio source to the "Input 1" phono jack, and connect the output of the second audio source to the "Input 2" phono jack.
4. The inputs 1 and 2 are combined and balanced through audio transformers configured to reject induced hum.
5. The line-level output is provided on the front-panel detachable terminal block. Connect this output to a 10 kΩ or higher input impedance line-level module or equipment input.
6. Ensure that the connections are secure and properly tightened.
7. If you require a balanced line-level output at +4 dBu, or if the input level is particularly low, it is recommended to use RDL's TX-LC2 instead of the TX-J2.
Please refer to the RDL TX-J2 TX Series Unbalanced Input Transformer User Manual for more detailed instructions and specifications.
Add New Comment