User Manual Q&AAnswer
Feb 07, 2025 - 04:42 AM
To connect the gofanco G4-0133A 1x8 HDMI 2.0 Splitter-Extender, please follow these steps:
1. Power off all devices, including your HDMI source and HDMI display(s).
2. Connect your HDMI source device (e.g., DVD player, set-top box, PC) to the Transmitter's HDMI In connector using an HDMI cable (not included).
3. Connect your CAT6/7 cables between the Transmitter and the CAT6/7 Receivers.
4. Optional: If you need local monitoring of the HDMI signal, connect an HDMI display to the HDMI Out connector of the Transmitter using an HDMI cable (not included).
5. Connect an HDMI display to each CAT6/7 Receiver's HDMI Out connector using an HDMI cable (not included).
6. Optional: If you need to control your HDMI devices from a remote location, connect the IR Receiver cables and the IR Emitter cable to the IR interface ports on the Transmitter and the Receivers.
7. Plug the included 12V/3A power adapter into the Transmitter's Power Jack and the 5V/2A power adapter into the Receiver's Power Jack. Then, plug the power adapters into a reliable power outlet.
8. Power on your HDMI source device and HDMI display(s). The Splitter-Extender is now ready for use.
For more detailed instructions and information, please refer to the gofanco G4-0133A 1x8 HDMI 2.0 Splitter-Extender User Guide provided with the product.
Add New Comment