User Manual Q&AAnswer
Feb 07, 2025 - 04:24 AM
To enable the Remote Sensor feature on the RW 403-SK Remote Sensor Connection Kit, follow these steps:
1. Ensure that the scale is turned off.
2. Press and hold both the C HIGH and MENU buttons simultaneously.
3. While holding the buttons, press the ON/OFF button.
4. Release all three buttons.
5. The scale will display "rsen0" to indicate that the Remote Sensor feature is currently off.
6. Press the UP arrow button to change the display to "rsen1" and turn on the Remote Sensor feature.
7. To confirm your selection, turn off the scale by pressing the ON/OFF button.
Please note that enabling or disabling the Drop & Hook Trailer feature will reset any calibration entered into the gauge.
For more information and detailed instructions, please refer to the RW 403-SK Remote Sensor Connection Kit Instruction Manual provided.
Add New Comment