How do I install the Kentec K-Mesh Lite system? (Kentec K-Mesh Lite Instruction Manual)

Answer

manuals.plus

Feb 07, 2025 - 04:23 AM

The Kentec K-Mesh Lite system is designed to provide a quick and easy installation process. Here are the steps to install the system:

1. Start by unpacking the K-Mesh Lite bundle and ensure that all the necessary components are included.

2. Mount the Syncro AS Lite fire detection panel in a suitable location according to the installation guidelines provided in the manual. Make sure to follow all safety precautions and regulations.

3. Connect the Translator Module to the Syncro AS Lite panel using the provided wiring connections. Refer to the manual for detailed instructions on how to properly connect the module.

4. Install the wireless optical detectors in the desired locations within the installation area. These detectors are equipped with adaptive radio signal processing algorithms for optimal performance. Adjust the sensitivity levels based on your specific requirements.

5. Place the wireless call point(s) in easily accessible areas. These call points can be easily reset using the provided call point key.

6. Ensure that all devices are securely mounted and properly connected to the Translator Module.

7. Power on the Syncro AS Lite panel and follow the programming instructions provided in the manual to configure the system settings and address the wireless devices.

8. Test the system thoroughly to ensure proper functionality and communication between the devices and the panel.

Please note that this is a general overview of the installation process. For detailed instructions and specific guidelines, refer to the Kentec K-Mesh Lite Instruction Manual provided with the product.