User Manual Q&AAnswer
Feb 07, 2025 - 04:20 AM
Wiring Instructions:
1. Before starting the installation, disconnect the negative terminal of your vehicle's battery to prevent any electrical short circuits.
2. Connect the positive (+) terminal of the speaker to the positive (+) terminal of the amplifier or receiver.
3. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the amplifier or receiver.
4. Repeat the above steps for each speaker in your system.
Installation Instructions:
1. Determine the location where you want to install the speakers. Ensure that the chosen location is suitable and provides enough space for the speakers to fit properly.
2. Use the included template to mark the mounting holes for the speakers on the chosen location.
3. Carefully cut out the marked holes using a suitable cutting tool, following the template guidelines.
4. Mount the speakers into the cut-out holes and secure them using the provided screws or mounting brackets.
5. Connect the speaker wires to the speakers, following the wiring instructions mentioned above.
6. Once the speakers are securely installed and wired, reconnect the negative terminal of your vehicle's battery.
For further assistance or additional information, you can contact PYLE's customer support team at the provided phone number or email address. They will be happy to assist you with any further questions or concerns you may have.
Add New Comment