User Manual Q&AAnswer
Feb 07, 2025 - 03:59 AM
To install the PORTOR LIGHTING PT-LHB Series Linear High Bay, please follow these steps:
1. Remove the fixture from packaging and inspect for any damages. Handle the fixture with care.
2. For chain mount installation, install the chain into the provided wire hanger. Secure the other end of the chain to a structure using hardware rated for the load. Install the wire hanger onto the side of the top fixture body. Make sure the wire hangers are fully engaged into the side holes on the top channel.
3. Connect the LED high bay wiring to the line wire. Connect black to black, white to white, and green to green. Use only UL listed wiring.
4. Note that there are purple and gray leads inside the driver compartment, which are 0-10V (low voltage) dimming leads. These should only be connected to dimming low voltage wiring.
5. Clean all residues and fingerprints from the new LED high bay and lens.
6. Double-check all hanging hardware before moving on to the next installation step.
Please refer to the PORTOR LIGHTING PT-LHB Series Linear High Bay Instruction Manual for more detailed instructions and safety precautions.
Add New Comment