User Manual Q&AAnswer
Feb 07, 2025 - 03:46 AM
To install the IKEA BROGRUND Shower Set, please follow these steps:
1. Start by ensuring that you have 4 x 1.5V AA batteries available. Please note that the batteries are not included with the product.
2. Open the battery compartment located on the back of the control panel by sliding the cover downwards.
3. Insert the batteries into the compartment, observing the correct polarity. The plus (+) and minus (-) signs on the battery compartment should align with the corresponding signs on the batteries.
4. Close the battery compartment cover securely.
5. Connect the shower hose to the handheld showerhead and tighten it by hand. Make sure it is securely attached.
6. Attach the showerhead holder to the desired location on the wall. You can use the included screws and wall plugs for a more permanent installation, or you can use adhesive tape (not included) for a temporary installation.
7. Hang the handheld showerhead onto the showerhead holder.
8. Turn on the water supply and test the shower set to ensure that it is working properly.
Please note that these instructions are a general guide. For more detailed and specific instructions, it is recommended to refer to the instruction manual provided with the IKEA BROGRUND Shower Set.
Add New Comment