User Manual Q&AAnswer
Feb 07, 2025 - 03:38 AM
To install the Ae Touch Technologies AE810 Intelligent Hub on the wall, please follow the instructions provided in the user manual:
1. Take out the whole machine from the packing box and loosen the MS* 100 cross round head xxxx on the wall bracket. Take out the horizontal bracket.
2. Install the horizontal bracket on the wall according to the instructions provided in Figure B of the manual.
- For 55"-65" screens, use more than 8 screws (4 on top, 4 on bottom).
- For 75"-98" screens, use more than 12 screws (6 on top, 6 on bottom).
- The hole diameter should be 10mm and the depth should be 65mm.
- Fix the horizontal bracket on the wall with M6*50 expansion bolts.
3. Hang the whole machine on the vertical bracket as shown in Figure C.
4. After hanging the machine, use a long screwdriver to tighten the two MS* 100 cross round head screws that have been pre-locked on the vertical bracket until they are pushed to the horizontal bracket, as shown in Figure D.
Please note that these instructions are a general guide, and the specific installation process may vary depending on the model of the Intelligent Hub. It is recommended to refer to the actual product and the user manual for precise instructions.
Add New Comment