User Manual Q&AAnswer
Feb 07, 2025 - 03:33 AM
To replace the keypad on the n-com SPCOM00000022 B4 KeyPad Control Panel, please follow these steps:
1. Remove the N-Com system from the helmet: Refer to the instruction booklet that came with the product for detailed instructions on how to remove the N-Com system from your helmet.
2. Remove the keypad: Locate the keypad on the control panel (Fig. 1) and gently remove it from its position.
3. Prepare the new keypad: If necessary, remove the bi-adhesive found on the plastic coupling clip of the new keypad. This step may not be required if the new keypad already comes with adhesive.
4. Apply the new keypad: Align the new keypad with the designated area on the control panel (Fig. 2-3) and firmly press it into place. Ensure that it is securely attached.
5. Reposition the N-Com system inside the helmet: Refer to the instruction booklet for detailed instructions on how to reposition the N-Com system back into your helmet.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific instruction manual provided with your n-com SPCOM00000022 B4 KeyPad Control Panel for accurate and detailed information on replacing the keypad.
Add New Comment