User Manual Q&AAnswer
Feb 07, 2025 - 03:29 AM
To set up the SERCOMM RP582B 802.11ax Router, please follow these steps:
1. Ensure that you have all the items included in the box: RP582B 802.11ax router/extender, power adaptor (DC IN: 12V/2A).
2. Connect the WAN cable to the RJ45 port labeled "Internet" on the router. This cable should be connected to your modem or internet source.
3. Connect the LAN cable to one of the RJ45 ports labeled "Ethernet" on the router. This cable should be connected to your computer or other devices that require a wired connection.
4. Connect the power adaptor's DC plug to the RP582B Power connector on the router. Then, plug the power adaptor into an AC outlet.
5. Once the router is powered on, the LED color should be blue and solid. After booting, the LED will turn green and breathe (searching for an internet connection). Once the internet is found, the LED will turn off.
Please note that these instructions are based on the information provided in the user manual for the SERCOMM RP582B 802.11ax Router. For further assistance or troubleshooting, it is recommended to consult the manual or contact the dealer or an experienced technician.
Add New Comment