User Manual Q&AAnswer
Feb 07, 2025 - 03:20 AM
To install the PQL 83090A LED Canopy Fixtures, please follow the instructions below:
1. Surface Mounted with J-Box:
- Loosen the xxxx on the side of the light and remove the bracket from the canopy light, leaving just the ring on the bracket.
- Fasten the bracket to the J-Box and pass the wire through the central hole for wiring.
- Attach the canopy light with the bracket by replacing the ring on the clips. Connect the Black wire for line, White for neutral, and Yellow/Green for ground.
- Slide the canopy light into the bracket and secure the xxxx on the side of the light to prevent it from sliding out. The installation is now complete.
2. Pendant with 3/4 Inch Conduit:
- Connect the wires threaded from the conduit to the canopy light. Connect the Black wire for line, White for neutral, and Yellow/Green for ground.
- xxxx the threaded conduit into the hole on top of the canopy light. The installation is now complete.
Please note that these are general installation instructions. It is important to consult a qualified electrician for proper installation to ensure compliance with the national electric code (NEC) and all applicable safety standards.
For more detailed instructions and safety precautions, please refer to the PQL 83090A LED Canopy Fixtures Instruction Manual provided by the manufacturer.
Add New Comment