User Manual Q&AAnswer
Feb 07, 2025 - 03:19 AM
To install the ABH MANUFACTURING INC PT180 Power Transfer, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Use the transfer case housing as a drilling template. Ensure that the holes align properly with the housing.
2. Only use stranded wires for the installation. Do not use solid wires.
3. The spring conduit included with the power transfer can accommodate wire bundles up to 5/16" thick. Carefully insert the wires through the device, taking caution not to damage them.
4. For wood frames, create a rectangular cut-out that is at least 11/16" deep to accommodate the power transfer.
5. It is recommended to label the wires for easy identification.
6. Ensure that the size and number of wires used comply with the National Electrical Code (NEC), NFPA, and local electrical codes.
7. The ABH MANUFACTURING INC PT180 Power Transfer is intended for low voltage use only, with a maximum of 30 VAC, 42.5 VDC, and 10 watts.
8. Use the specified screws for installation. The manual provides the xxxx details and quantities required for both the frame and the door.
If you require further assistance or have specific questions regarding the installation process, please refer to the provided instruction manual or contact ABH Manufacturing Inc. directly through their website or email.
Add New Comment