User Manual Q&AAnswer
Feb 07, 2025 - 03:08 AM
To install the LUCIDE 23650 Agena Desk Lamp, please follow these steps:
1. Before starting the installation, make sure to read and understand the safety instructions provided in the manual.
2. Begin by isolating the power supply to the area where you will be installing the lamp. This is important for your safety.
3. Decide on the location where you want to install the lamp. Ensure that it is suitable for indoor use and that it is not in contact with water or any liquids. Also, maintain the minimum distance from inflammable objects as indicated on the lamp.
4. Once you have chosen the location, proceed with the installation. It is recommended to have a qualified electrician perform the installation to ensure proper and safe installation.
5. During the installation, ensure that the cables are not squeezed or damaged by sharp edges. If the external flexible cable gets damaged, it should be replaced by the manufacturer, their service agent, or a qualified electrician.
6. After the installation is complete, connect the lamp to the power grid using the provided cable with a plug. Make sure to use the correct bulb with the appropriate wattage as indicated on the product.
7. The LUCIDE 23650 Agena Desk Lamp is dimmable and has a motion sensor. You can control the dimming function using the dimmer located on the product. The lamp is also adjustable in height after installation.
8. If any issues or doubts arise during the installation process, it is recommended to contact a qualified electrician for assistance.
Please note that this is a general guide, and for detailed instructions and safety precautions, refer to the installation guide provided by Lucide.
Add New Comment