User Manual Q&AAnswer
Feb 07, 2025 - 02:48 AM
To install the GE APPLIANCES PTW700BSTWS/DG Top Load Washer, please follow the installation instructions provided in the owner's manual. Here are some key points to consider:
1. Circuit Requirements: Ensure that you have an individual, properly-grounded branch circuit with a three-prong grounding-type receptacle. The circuit should be protected by a 15 or 20 amp circuit breaker or a time-delay fuse.
2. Electrical Rating: The washer operates on 120V, 60Hz, and requires a 10A electrical rating.
3. Outlet Location: The washer wall outlet must be located within 36 inches of the service code entry. It should not be located behind the dryer.
4. Dimensional Data: Before installing, consult the installation instructions packed with the product for current dimensional data. This will provide you with the necessary measurements and clearances required for proper installation.
If you need further assistance or have specific installation-related questions, it is recommended to visit the GE Appliances website at geappliances.com or contact the GE Answer Center® Service at 800.626.2000 for expert guidance.
Add New Comment