User Manual Q&AAnswer
Feb 07, 2025 - 02:39 AM
In DMX mode, you can control the HQ POWER HQLP10011 Showpar 12/4W using a universal DMX controller. Here are the steps to control the device in DMX mode:
1. Connect the device to the DMX controller using a DMX cable.
2. Set the digital start address on the device. This is the channel number from which the device starts to "listen" to the DMX controller. You can set the same address for multiple devices to control them simultaneously, or set individual addresses for each device.
3. Use the DMX controller to send control signals to the device. Changing the settings of the corresponding channel on the controller will affect the device's behavior.
Refer to the manual for more information on setting the digital start address and the DMX channel values for different functions of the device.
Please note that the DMX controller is not included with the HQ POWER HQLP10011 Showpar 12/4W and needs to be purchased separately.
Add New Comment