User Manual Q&AAnswer
Feb 07, 2025 - 02:37 AM
To assemble the Toolland ST100601 Wooden Cart - Plop The Gnome, please follow these steps:
1. Open the package and carefully take out all the parts.
2. Lay the frame on a flat and solid surface with the axes facing upwards.
3. Fix the front axis onto the frame using the bolthead and xxxx provided.
4. Insert an axle into each axis.
5. Mount a washer on each side of the axles.
6. Slide a wheel onto each side of both axles and fix the wheels with the carrier.
7. Turn the frame onto its wheels and place the lower part on the frame.
8. Place the two side parts onto the lower part.
9. Next, place both the front and the back part.
10. Insert the shaft into the front axis and fix it with the bolt and nut.
For more detailed instructions and illustrations, please refer to the "Assembly" section of the Toolland ST100601 Wooden Cart - Plop The Gnome user manual.
Note: It is important to use the original accessories provided with the cart and follow the assembly instructions carefully to ensure proper functionality and safety.
Please refer to the manual for any additional information or troubleshooting tips.
Add New Comment