User Manual Q&AAnswer
Feb 07, 2025 - 02:27 AM
To replace the SPCOM00000069 adapter on your helmet, please follow these steps:
1. Select the specific adapter for your helmet: The compatible helmet model is indicated on the back of the support. Make sure you have the correct adapter for your helmet.
2. Apply double-sided adhesive tape: Use the double-sided adhesive tape provided with the adapter. Apply it to the selected plastic adapter. This tape is included as standard equipment.
3. Insert the FLEX cable of the ESS system: Locate the hole on the selected adapter and insert the FLEX cable of the ESS system into it. Ensure that the cable is inserted in the direction shown in the image.
4. Rotate and align the adapter: Rotate the adapter until it is in a horizontal position, aligning it with the ESS system. This will ensure proper functionality and compatibility.
5. Press the components together: Once the adapter and ESS system are aligned, press the two components together firmly. Apply enough pressure to ensure they stick together securely.
Please note that these instructions are a general guide. For more detailed information and illustrations, refer to the product manual instructions provided with the n-com SPCOM00000069 Adapter.
Add New Comment