User Manual Q&AAnswer
Feb 07, 2025 - 01:34 AM
To charge your Phonak P30 hearing aids using the Phonak Life Charger, please follow these steps:
1. Ensure that the Phonak Life Charger is connected to a power source using the provided power adapter.
2. Open the charging compartment of the Phonak Life Charger by sliding the cover upwards.
3. Insert the Phonak P30 hearing aids into the charging slots of the Life Charger. Make sure that the hearing aids are properly aligned with the charging contacts.
4. Close the charging compartment by sliding the cover downwards until it clicks into place.
5. The charging process will start automatically once the hearing aids are properly inserted and the charger is connected to a power source. The LED indicators on the front of the charger will light up to indicate the charging status.
6. During the charging process, the LED indicators will show the progress of each hearing aid's charge level. A solid green light indicates a fully charged hearing aid, while a blinking green light indicates that the hearing aid is still charging.
7. It is recommended to leave the hearing aids in the charger until they are fully charged. The charging time may vary depending on the current charge level of the hearing aids.
8. Once the hearing aids are fully charged, you can remove them from the charger and use them as needed.
Note: It is important to refer to the specific instructions provided in the Phonak P30 hearing aid user guide for additional information on charging and maintenance of the hearing aids.
For further assistance or troubleshooting, please consult the Phonak P30 Hearing Aid Life Charger User Guide or contact Phonak customer support.
Add New Comment