User Manual Q&AAnswer
Feb 07, 2025 - 01:14 AM
To install the n-com SPCOM00000110 Nolan Adapter Kit on your helmet, follow the instructions provided in the user guide. The installation process varies depending on the helmet model. Here are the steps for each compatible helmet:
A. N100-5/PLUS, N90-3, N80-8, N87/PLUS, N70-2 GT/X:
- Reposition the shell edge gasket.
- Remove the film of the double-sided adhesive tape from sections 1, 2, and 3.
- Apply adapter "A" to the helmet shell, following the predefined template.
- Hook the light to the adapter, sliding it downwards.
B. N40-5 GT/-5, N40/FULL:
- Reposition the shell edge gasket.
- Peel off sections 1 and 2 of the film of the double-sided adhesive tape.
- Apply adapter "A" to the helmet shell, following the predefined template.
- Hook the light to the adapter, sliding it downwards.
C. N44/EVO:
- Reposition the shell edge gasket.
- Peel off sections 2 and 3 of the film of the double-sided adhesive tape.
- Apply adapter "A" to the helmet shell, following the predefined template.
- Hook the light to the adapter, sliding it downwards.
D. N104/EVO/ABSOLUTE, N100-5, N70-2 GT/X:
- Apply the double-sided adhesive tape supplied with the adapter.
- Reposition the shell edge gasket.
- Remove the film of the double-sided adhesive tape.
- Insert the flex cable of the ESS system into the hole of the adapter.
- Rotate the adapter and apply it to the helmet shell.
- Hook the light to the adapter, sliding it downwards.
Please refer to the user guide for more detailed instructions and illustrations specific to your helmet model.
Add New Comment