User Manual Q&AAnswer
Feb 07, 2025 - 12:36 AM
To replace the keyboard on the n-com SPCOM00000050 Helmet Intercom System, please follow these steps:
1. Remove the N-Com system from the helmet as instructed in the provided instruction booklet.
2. Locate the plastic clip that holds the keyboard in place and remove it.
3. Take out the existing keyboard from the system (Fig. 1-2).
4. If there is any bi-adhesive on the plastic coupling clip, remove it before applying the new keyboard.
5. Apply the new keyboard to the system, ensuring it is properly aligned.
6. Reposition the plastic coupling clip to secure the new keyboard in place (Fig. 3-5).
7. Carefully reposition the N-Com system back inside the helmet following the instructions in the provided booklet.
Please refer to the user manual for more detailed instructions and illustrations on replacing the keyboard.
Add New Comment