User Manual Q&AAnswer
Feb 07, 2025 - 12:25 AM
To replace the battery in your n-com SPCOM00000109 Bluetooth Motorcycle Intercoms, please follow these steps:
1. Remove the N-Com system from the helmet: Refer to the instruction booklet that came with your intercoms for detailed instructions on how to remove the N-Com system from your helmet.
2. Open the e-box: Locate the e-box on the N-Com system (Fig. 1) and open it carefully.
3. Gently disconnect the battery: Inside the e-box, you will find the battery connected to a connector (Fig. 2). Gently disconnect the battery from the connector.
4. Connect the new battery: Take the new battery and connect it to the connector in the same manner as the old battery.
5. Close the e-box: Once the new battery is connected, close the e-box securely (Fig. 3).
6. Reposition the N-Com system inside the helmet: Follow the instructions in the instruction booklet to reposition the N-Com system back into your helmet.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific instruction manual provided with your n-com SPCOM00000109 Bluetooth Motorcycle Intercoms for accurate and detailed information on replacing the battery.
Add New Comment