User Manual Q&AAnswer
Feb 07, 2025 - 12:17 AM
To connect the Rodtech Click rods, keep them as straight as possible and simply click them together. The Click rods have been designed to easily lock together with a click sound. If you are using the button lock range, you will need to depress the button to connect the rods.
To disconnect the rods, first remove the drill from the rod. Then, take the weight off the rod nearest the opening with one hand and keep the rods as straight as possible. Slightly twist the rod you wish to disconnect in the opposite rotation used on the drill, and remove it in a straight fashion. Avoid trying to uncouple the rods with a bend, as it can be difficult and feel as if the rods are locked together.
It is important to note that when disconnecting the rods, it is recommended to take the weight (pressure) off the rod nearest the opening and keep the rods as straight as possible.
Add New Comment