User Manual Q&AAnswer
Feb 07, 2025 - 12:01 AM
To install the Caséta Wireless in-wall dimmer, follow these steps:
1. Turn off the power at the circuit breaker before installing the dimmer to avoid any electrical shock hazards.
2. Remove the existing switch from the wall by removing the wallplate and pulling the switch away from the wall. If your switch has more than 3 wires attached, refer to the "Installing Caséta Wireless in a 3-way switch application" video on the Caséta Wireless website.
3. If necessary, remove the side sections of the dimmer. Do not remove the outside side sections on dimmers at the end of the gang. Each dimmer has inside side sections removed.
4. Connect the bare copper (or green) "ground" wire from the wallbox to the green wire on the dimmer using a wire connector.
5. Connect either of the remaining wires from the wallbox to either of the remaining wires on the dimmer using a second wire connector.
6. Connect the remaining wire from the wall to the remaining wire on the dimmer using a third wire connector.
7. Mount the dimmer in the wallbox, ensuring it is securely installed.
Please note that these are general installation instructions. For complete installation instructions and how-to videos, visit the Caséta Wireless website.
Source: Caseta Wireless In Wall Dimmer User Guide
Add New Comment