How do I install the GARNET 709-4LP SeeLevel II 4 Tank Monitoring System? (GARNET 709-4LP SeeLeveL II 4 Tank Monitoring System User Guide)

Answer

manuals.plus

Feb 06, 2025 - 11:52 PM

Installation of the GARNET 709-4LP SeeLevel II 4 Tank Monitoring System requires following the provided installation instructions. Here is a step-by-step guide:

1. Begin by selecting a suitable location for the monitor panel. It should be easily accessible and within view for convenient monitoring.

2. Ensure that the area where the monitor panel will be installed is clean and free from any debris or obstructions.

3. Connect the monitor panel to a 12-volt power source. The system includes a power harness that needs to be connected to the appropriate power supply.

4. Mount the monitor panel securely using the provided mounting bracket and screws. Make sure it is firmly attached to prevent any movement or damage during travel.

5. Install the tank sensors on each of the tanks you wish to monitor. The system supports up to four tanks. Follow the specific instructions provided for attaching the sensors to your tanks. It is important to ensure proper placement and secure attachment to avoid inaccurate readings.

6. Connect the tank sensors to the monitor panel using the provided sensor harnesses. Each sensor has a corresponding connector on the monitor panel. Match the connectors and plug them in securely.

7. Once all the sensors are connected, turn on the power to the system and verify that the monitor panel displays the tank levels accurately. If any discrepancies are noticed, double-check the sensor connections and ensure they are properly installed.

8. Test the system by filling or emptying each tank and observing the corresponding changes in the monitor panel display. This will help confirm the accuracy of the tank level readings.

9. Finally, tidy up any loose wiring and secure it in place using zip ties or other appropriate methods. This will help prevent any damage or interference while the vehicle is in motion.

Please note that the above instructions are a general overview of the installation process. For detailed and specific instructions, refer to the GARNET 709-4LP SeeLevel II 4 Tank Monitoring System User Guide provided with the product.