User Manual Q&AAnswer
Feb 06, 2025 - 11:47 PM
To reverse the door hinge on your SCANCOOL DKS 142 BE Display Cooler, please follow these steps:
1. Remove the two screws that hold the upper hinge (right side) to the frame.
2. Lift the door off and place it on a padded surface to prevent scratching.
3. Remove the blanking plug from the hole in the upper left corner of the door and transfer it to the uncovered hole on the upper right corner. Press firmly to secure it.
4. Remove the two screws that hold the lower hinge.
5. Remove the adjustable front left foot and transfer it to the other side.
6. Remove the bolt pin from the lower hinge and reverse the direction of the lower hinge. Secure the lower hinge to the left side of the lower frame with the two screws. Re-insert the bolt pin.
7. Set the door into position, making sure it is seated comfortably onto the lower hinge.
8. Holding the door closed, secure the upper hinge into the top frame with the two screws. Check that the door is level and tighten the screws firmly.
Please refer to the diagrams in the manual (Fig 1 and Fig 2) for a visual representation of the door hinge reversal process.
Note: It is important to keep all parts removed during the process for the reinstallation of the door.
Add New Comment