User Manual Q&AAnswer
Feb 06, 2025 - 11:44 PM
To reverse the door hinge on the SCANCOOL DKS 142 BE Display Cooler, please follow these steps:
1. Remove the two screws that hold the upper hinge (right side) to the frame.
2. Lift the door off and place it on a padded surface to prevent scratching.
3. Remove the blanking plug from the hole in the upper left corner of the door and transfer it to the uncovered hole on the upper right corner. Press firmly to secure it.
4. Remove the two screws that hold the lower hinge.
5. Remove the adjustable front left foot and transfer it to the other side.
6. Remove the bolt pin from the lower hinge and reverse the direction of the lower hinge. Secure the lower hinge to the left side of the lower frame with the two screws. Re-insert the bolt pin.
7. Set the door into position, making sure it is seated comfortably onto the lower hinge.
8. Holding the door closed, secure the upper hinge into the top frame with the two screws. Check that the door is level and tighten the screws firmly.
Please refer to the figures in the manual (Fig 1 and Fig 2) for the position of the components before and after reversing the door hinge.
Note: Make sure to keep all the parts that are removed safely, as you will need them for the reinstallation of the door.
For any further assistance or clarification, please refer to the SCANCOOL DKS 142 BE Display Cooler User Manual.
Add New Comment