Answer

Feb 06, 2025 - 10:57 PM
Sure! Here are the step-by-step instructions for installing the KOBE CHX81 SQB-2 Series Range Hood:
1. Before installation, carefully check all contents of the package and inspect the unit for any shipping damages or defects.
2. Have a certified contractor or electrician test the unit before installation.
3. If there are any problems with the unit, do not install it and keep all original packaging materials. Contact your merchant for product replacement.
4. Read the provided user manual and familiarize yourself with the important safety instructions.
5. Calculate the installation measurements using the information provided in the manual (Table 1).
6. Ensure that the clearance between the cooktop and the bottom of the range hood is within the recommended range of 26" to 30".
7. Prepare the back wall frame with cross-framing lumber if necessary, following the measurements provided in the manual.
8. Mark the leveling point of the hood on the wall and position two screws leaving 1/8" away from the wall.
9. Align the hood-mounting bracket to the screws on the wall and hook the hood into place. Tighten the screws to secure the hood to the wall.
10. Put the two flappers on the 6" round exhaust vent adapter and attach the rubber plate to the bottom of the adapter. Secure the adapter to the exhaust opening using six screws.
11. Connect a 6" round steel pipe (not included) from the hood's exhaust to the ductwork above. Use duct tape to secure and make all joints airtight.
12. Install the duct cover-mounting bracket on the wall according to the provided measurements. Secure it with screws.
13. Put the entire duct cover onto the hood and secure the outer duct cover to the hood-mounting bracket using screws. Slide the inner duct cover until it reaches the duct cover-mounting bracket and secure it with screws.
14. Connect the range hood to an outlet or hardwire it according to the provided instructions. Ensure that the range hood is properly grounded by a qualified electrician.
15. Remove any protective film from the hood and make sure all accessories, such as baffle filters, are properly installed.
16. Test the range hood to ensure it is working properly.
Please note that these are general installation instructions. It is important to refer to the specific instructions provided in the user manual for your model of the KOBE CHX81 SQB-2 Series Range Hood.
Add New Comment