User Manual Q&AAnswer
Feb 06, 2025 - 10:53 PM
To assemble and install the TRIO LIGHTING 270669142 Wall Light, please follow the instructions below:
1. Safety Precautions:
- Before starting the installation, make sure to read and understand all the safety instructions provided in the manual.
- Ensure that the power supply is turned off before handling or installing the wall light.
2. Assembling the Wall Light:
- Start by unpacking all the components and ensuring that all parts are included.
- Connect the LED light source (7W) to the wall light fixture.
- Make sure to use the correct voltage (230V~50Hz) for the wall light.
3. Installing the Wall Light:
- Choose a suitable location on the wall where you want to install the wall light.
- Mark the positions for drilling holes according to the mounting bracket provided.
- Drill the holes and insert the appropriate wall plugs (not included) if necessary.
- Attach the mounting bracket securely to the wall using screws (not included).
- Connect the wires from the wall light to the electrical wiring in your wall, following the appropriate electrical codes and regulations.
- Make sure to connect the wires correctly, matching the live, neutral, and ground wires.
- Once the wiring is properly connected, fix the wall light onto the mounting bracket.
4. Testing and Final Steps:
- After installation, turn on the power supply and test the wall light to ensure it is functioning properly.
- If the wall light does not turn on, check the wiring connections and make sure the power supply is functioning correctly.
- Adjust the position of the wall light if necessary.
- Finally, refer to the user manual for any additional instructions or maintenance guidelines.
Please note that the provided instructions are a general guide. It is always recommended to refer to the specific instruction manual that came with the TRIO LIGHTING 270669142 Wall Light for detailed and accurate installation steps.
Add New Comment