Answer

Feb 06, 2025 - 10:36 PM
To install the Garnet Instruments 709-P3W SeeLeveL II Tank Monitor, please follow the steps outlined in the installation guide provided by the manufacturer. Here is a general overview of the installation process:
1. Ensure that all power circuits are fused. If a fuse is not provided with the system, it is the installer's responsibility to install a fuse with a maximum rating of 10 amps.
2. Connect the pigtail B (6-pin) of the tank monitor to the display unit.
3. Use the provided 3-way switch wiring diagram to connect the tank monitor to the appropriate switches.
4. If the pump requires more than 10 amps, a relay is required. Install the relay to handle the higher amperage.
It is important to refer to the specific instructions and diagrams provided in the installation guide for your particular setup. The manual will provide detailed information on wiring connections, mounting options, and any additional considerations specific to your installation.
Please note that it is recommended to consult a professional or an experienced installer if you are unsure about any aspect of the installation process.
Add New Comment