User Manual Q&AAnswer
Feb 06, 2025 - 10:32 PM
To properly install the Garnet Instruments 709-P3 SeeLeveL II Tank Monitor, follow the steps outlined in the installation guide. Here is a general overview of the installation process:
1. Ensure all power circuits are fused: It is crucial to have all power circuits fused for safety purposes. If the system does not come with a fuse, it is the installer's responsibility to install a fuse with a maximum rating of 7.5 amps. If the pump requires more than 7.5 amps, a relay is required.
2. Wiring the display: The display of the Garnet Instruments 709-P3 SeeLeveL II Tank Monitor needs to be properly wired. Refer to the provided 3-way switch wiring diagram for guidance. Make sure to connect the appropriate wires to the correct terminals on the display.
3. Follow the wiring instructions: The installation guide should provide detailed wiring instructions specific to your setup. It is important to follow these instructions carefully to ensure proper functionality of the tank monitor.
4. Test the system: Once the installation is complete, test the system to ensure everything is working correctly. Monitor the tank levels and verify that the display is accurately reflecting the tank levels.
For more detailed instructions and diagrams, refer to the Garnet Instruments 709-P3 SeeLeveL II Tank Monitor Installation Guide. It will provide step-by-step instructions specific to your installation requirements.
Add New Comment